|
| 
|
Read the following before attempting any upgrade:
- Perform the upgrade at your OWN RISK as any upgrade will void your warranty and forfeit any support from the manyfacturer(s).
- We DO NOT TAKE ANY RESPONSIBILITY when something goes wrong during the upgrade.
- The upgrade is intended for EXPERT USERS only who know what they are doing.
- Only perform the upgrade when it is absolutely necessary, for example to use the CD-Writer with incompatible burning software programs.
- Before performing the upgrade turn off and exit ALL CD-related programs which may interfere with the upgrade (especially packet-writing software like Adaptec DirectCD or Ahead InCD).
- Always power off the computer to perform a COLD BOOT. Then turn on the computer and test if the upgrade was successful.
|
|
| Upgrade a Creative Labs 12x10x32E to Plextor 12x10x32A |
 |
|
Creative 12x10x32 to Plextor Name Converter [57 KB] |
|
|
| The Creative Labs 12x10x32E uses the Plextor 12x10x32A drive on the inside. The Name Converter is able to change all connected Plextor drives to a real Plextor 12x10x32A!
The upgrade software only seems to work on a Windows 98 system with SCSI ASPI installed! Check the CD/DVD Utility pages how to install a working SCSI ASPI layer software!
|
|
|
- Physically disconnect any CD-ROM or CD-Reader from you IDE & SCSI ports except for the Creative Labs 12x10x32E.
- Execute PXFIX.EXE to convert the the Creative Labs 12x10x32E to a Plextor 12x10x32A.
- Power off the computer to perform a COLD BOOT.
- Ready!
|
|
Source Links:
|
|
|
|
